WNS-FDY-6
The full carrier at 0.3 square metres. Takes front and back plates and side plates.
Ballistic plates
Three plate constructions, from alumina faced plates down to a 0.65 kg pure PE plate.
Ballistic plate in a camouflage cover, strike face.
Three ways to build a plate
An alumina faced plate puts a hard ceramic layer in front of a PE backing. Silicon carbide does the same job with a lighter ceramic. A pure PE plate leaves the ceramic out entirely and relies on the PE layup.
Which one you order comes down to the weight you can carry and the coverage you need. Send us both and we will tell you which constructions fit.
The model list
Every plate we make, by construction and size. Tell us the model and the quantity and we can quote from this list.
Alumina and PE, 250 x 300 mm
WNS-FDB-1 to 8
2.6 to 2.95 kg
Alumina and PE side plate, 150 x 150 mm
WNS-FDB-9
Alumina and PE side plate, 150 x 200 mm
WNS-FDB-10
Silicon carbide and PE, 250 x 300 mm
WNS-FDB-11
2.3 kg
Pure PE, 250 x 300 mm
WNS-FDB-12
1.65 kg
Pure PE, 250 x 300 mm
WNS-FDB-13
0.65 kg
Carriers these plates fit
Front and back plates are 250 x 300 mm. Side plates are 150 x 150 mm or 150 x 200 mm. Both fit the tactical carriers below.
WNS-FDY-7 and 8
The smaller carriers at 0.14 square metres each, for front and back plates only.
Plate covers
Plates are supplied in a camouflage cover. Tell us the pattern you need and we confirm it against your order.
Tested to GA 141-2010 (Chinese police standard) by the Third Research Institute of the Ministry of Public Security. Test report available on request.
Sample model FDB5Y-WNS-01Which report you get
The test report for model FDB5Y-WNS-01 is available on request. Ask for it before you commit to a quantity.
Ask for a quote on ballistic plates
Send the model numbers, the sizes, the carrier you are pairing them with and the quantity. We reply with what we can make and the sample date.